Celco Spider67, Manual

Page: 10 / 68

Safety instructions
2020/7/V1.0 10 | 68 Manual-No.: 10001_hdb_en
2 SAFETY INSTRUCTIONS
This chapter contains important safety instructions to prevent personal injury and damage to property.
2.1 Intended use
The devices are designed for use in the industrial sector.
The Spider67 mobile radio system is a device of EMC class A. It can cause radio interference in
residential and mixed areas. In this case, the operator may be required to take appropriate
countermeasures and to pay for them.
The operation of the Spider67 mobile radio system is only permitted using the accessories available
from Elco. The use of other accessories may lead to the expiry of the operating licence. The approved
accessories for this radio system can be found in the appendix and on the product at www.elco-
automation.de.
The Spider67 mobile radio system is approved in the following countries:
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg,
Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland, United Kingdom.

In countries not listed above, please consult Elco Industrie Automation GmbH before
commissioning.
2.2 Unintended use
Do not use the device outside the areas described in this manual, in the technical specifications and in
the operation instructions.

Only qualified and authorized personnel should work with/on this device/module.

The personnel must not:
▪
make structural, technical or electrical changes to the module,
▪
use the module as a climbing aid,
▪
clean the module with a high-pressure cleaner,
▪
use the module outside areas described in this manual, in the technical data and in the
operating instructions,
▪
use the module as a safety-orientated device. It does not comply with the relevant
standards. Safety functions of the system are not guaranteed!
▪
operate the module outdoors,
▪
operate the module permanently in liquids,
▪
operate the module in damaged condition
The personnel must not use the off-status of the module outputs for safety-related requirements of the
system/machine!
Elco Industrie Automation GmbH accepts no liability for damage caused by improper use. The risks
associated with improper use lie solely with the user
2.3 Product safety
The product corresponds to the state of the art at the time of delivery and is generally considered to be
safe to operate.