34
Examples:
CH/freq
QMPro
1100/1100i
QMPro1200/1200i
2.1,
9.1
7
(177MHz) 2.1
23.1,
57.2
57
(423MHz)
55.1
101.1,107.1 101
(657MHz)
100.1
130.1,
129.2
134
(855MHz)
134.1
As shown in the above examples, the installer can easily set and
select any Virtual channel regardless of the Output Channel occupied
by the modulator.
VCN (Manual one-part)-VCN Manual 1-part- will allow the installer
to control VCN channels regardless of the CH/freq. selected on the
Output Setup page of the device.
Examples:
CH/freq
QMPro
1100/1100i
QMPro
1200/1200i
2,
15
7
(177MHz) 2
59,
69
57
(423MHz)
59
101,107
101
(657MHz)
102
133,
135
134
(855MHz)
130
VCN Mode – Press OK to enter the VCN menu. Select the VCN Mode
required.
Factory default: VCN Mode: Manual (one-part)
VCN Modes Available:
VCN Mode: Manual (two-part) Use ‘VCN(Major Ch No.) Menu’ to set
Major VCN channel and VCN (Minor Ch. No.) menu to set Minor chan-
nel.
VCN Mode: Manual (one-part) - Use ‘VCN (one part) Menu’ to set VCN
channel.
Example: VCN can be set to a range 1-999.
Summary of Contents for QMPro 1100
Page 1: ...Encoder Modulators...
Page 10: ...09 Visual Identification Illustrations...
Page 47: ...46...
