
PANEL VIEW & FUNCTION
INSTALLATION VIEW
SPECIFICATIONS
Cable
CE labs recommends using a high-quality CAT5e or CAT6 UTP cable. Distances
over 30 meters, it is recommended to use a CAT6 cable. Do NOT use STP cable.
Transmission Distance
The transmission distance will be affected by different HDMI equipment, HDMI jumper
cables, patch panels, poorly assembled RJ-45 connectors, and CATx cable quality
.
RJ45 Define: Video Link (TIA/EIA-568-B)
1. Orange-White
TMDS DATA2 +
2. Orange
TMDS DATA2 –
3. Green-White
TMDS CLOCK + / HDMI 5V
4. Blue
TMDS DATA1 +
5. Blue-White
TMDS DATA1 –
6. Green
TMDS CLOCK – / HDMI 0V
7. Brown-White
TMDS DATA0 +
8. Brown
TMDS DATA0 –
Caution
1. Keep cables away from any equipment with an electromagnetic wave, e.g.,
mobile phone, microwave, radio equipment, fluorescent lamp, high voltage power
lines...etc.
2. This device is not a network device, do not connect with a network to avoid
damages.
HX40M Transmitter
ITEM
480i/p
,
720p
,
1080i/p @ 24/50/60Hz
Tx : ± 30
•
Rx : ± 55
30KHz ~ 60KHz
5 meters
HDMI Type A x 1
RJ45 x 1
3.5mm Phone Jack x 1
Resolution
IR Emit/Receive Angle
IR Carrier Frequency
IR Emit/Receive Distance
Video Input /Output
Linking Interface
2 Pin Dip x 1 •
Slide x 1
LED Blue x 1
•
RJ45 Yellow/Green x 1
HX40M Receiver
Slide x 1
Switch
LED
IR Cable Interface
PS3
40M (max)
CAT5e Cable
Transmitter
Receiver
TV
Power Supply
Power Consumption
Temperature
Dimension (mm)
Weight (g)
420mA
180mA
Operation: 0 to 55
o
– Storage: -20 TO 85
o
– Humidity: up to 95%
DC 5V 1A
67 x 102 x 27
150
67 x 91 x 27
140
HX40M
LINK
DC 5V
POWER
HDMI IN
SETTING
On
HDMI & IR CAT5
IR
1 2
ON
IR
Tx Rx
Transmitter
HX40M
LINK
DC 5V
POWER
HDMI OUT
On
HDMI & IR CAT5
IR
IR
Tx Rx
Receiver
EDID Steup: Default
Set DIP switch 1 off
Set DIP switch 2 off
Select the first default EDID: Support 1080i/LPCM 2 Channel
-OR-
Set DIP switch 2 on
Select the second default EDID: Support 1080p/LPCM 5.1 Channel
Use External EDID
1. Set DIP switch 1 on, unplug the power to Transmitter
2. Connect Transmitter to HDMI connector of TV for auto backup
3. Plug in power for Transmitter, TV EDID back up complete when Blue LED keeps flashing
4. After TV EDID backup, Transmitter power must be reset (unplug and plug) to activate
Dip Switch Function
1. Use the default EDID
Use the backup TV EDID
2. Select the first default EDID: Support 1080i/LPCM 2 Channel
Select the second default EDID: Support 1080p/LPCM 5.1 Channel
After changing Dip Switch settings, power must be reset (unplug and plug) to activate
LED Indication
BLUE
Power
BLUE Flashing
TV EDID backup completed
GREEN
Sending and Receiving power & HDMI signal
YELLOW
No data input or signal too weak
Transmitter
Receiver