CEL-MAR ADA-401WA, User Manual

Page: 3 / 16

1. GENERAL INFORMATION
Thank you for your purchase of CEL-MAR Company product. This product has been completely tested and is covered by a two year
warranty on parts and operation from date of sale.
If any questions or problems arise during installation or use of this product, please do not hesitate to contact Technical Support at +48
41 362-12-46 or e-mail support@cel-mar.pl.
1.1. WARRANTED INFORMATION
ADA-401WA converter is covered by a two year warranty from date of sale. In case of being damaged it will be repair or the damaged
component will be replace. The warranty does not cover damage caused from improper use, materials consumption or any
unauthorized changes. If the product does not function (is damaged), or not operate in accordance with the instructions, will be
repaired.
All warranty and no warranty repairs must be returned with paid transport and insuring to the
CEL-MAR Company.
CEL-MAR Company under no circumstances won't be responsible for ensuing damage from improper using the product or as a result
of random causes: the lightning discharge, the flood, the fire and the like.
CEL-MAR Company is not be held responsible for damages and loss including: loss of profits, loss of data, pecuniary losses ensuing
from using or the impossibility of using this product.
In specific cases
CEL-MAR Company discontinue all warranties and in particular do not follow the user manual and do not accept
terms of warranty by the user.
1.2. GENERAL CONDITIONS FOR SAFE USE
The device should be installed in a safe and stable places (eg, electroinstallation cabinet), the powering cable should be arranged so
as not to be exposed to trampling, attaching, or pulling out of the circuit.
Do not put device on the wet surface.
Do not connect devices for nondescript powering sources,
Do not damage or crush powering wires.
Do not make connection with wet hands.
Do not adapt, open or make holes in casings of the device!
Do not immerse device in water or no other liquid.
Do not put the fire opened on device sources: candles, an oil lamps and the like.
Complete disable from the supply network is only after disconnecting the power supply circuit voltage.
Do not carry out the assembly or disassembly of the device if it is enabled. This may result to short circuit and damage the device.
The device can not be used for applications that determine human life and health (eg. Medical).
1.3. CE LABEL
The CE symbol on the device CEL-MAR means compatibility with electromagnetic compatibility Electromagnetic
Compatibility Directive
EMC 2014/30/WE. Declaration of Conformity is available by contact with Technical Service (email:
support@cel-mar.pl; phone: +48 41 362-12-46).
1.4. ENVIRONMENTAL PRESERVATION
This sign on the device inform about putting expended device with other waste materials. Device should send to the
recycling. (In accordance with the act about the Electronic Appliance Expended from day 29 of July 2005)
1.5. SERVICE AND MAINTENANCE
The ADA-401WA converter does not require the servicing and maintenance.
Technical support is available at 48 41 362-12-46 in 8.00-16.00, from Monday to Friday or e-mail support@cel-mar.pl .
1.6. PACK CONTENTS
Converter is delivered with: User Manual, resistors: Rt=120
W
(2 pcs.), CD with ADAConfig software.
2. PRODUCT INFORMATION
2.1. PROPERTIES
●
Possibility of creating network on the basis of RS485 bus with addressable node to which are being connected 1-WIRE devices,
●
RS-485 conversion to 1-WIRE,
●
Converted signals: RX, TX,
●
Possibility of operating on MicroLAN bus,
●
Possibility of programming EPROM memory on the 1-WIRE bus (version -2-x-x),
●
Baud rate of RS-485 bus – up to 230.4 kbps,
●
Standard baud rate of 1-WIRE bus up to 16.3 kbps,
●
Overdrive baud rate of 1-WIRE bus up to 142 kbps,
●
External power supply 10 - 30 VDC stable with power min. 3W,
●
1kV= or 3kV= galvanic isolation between RS-485 interface and power supply,
●
3kV= optoisolation in signal channel between RS-485 and 1-WIRE interface,
●
Connection RS-485 interface via screw joint,
●
Connecting 1-WIRE bus and power supply via screw terminal,
●
Implemented short circuit protection and over-voltage protection on RS-485 interface line,
●
Implemented protection against power supply reverse connection,
●
Casing compatible with DIN 43880 standard– mounting in typical electro-installation unit,
●
Casing adapt to rail mounting according to Dinas EN 50022 standard,
●
Casing dimensions (W x H x L) 53mm x 90mm x 62mm,
3
ADA-401WA