●
Connection RS-232 network via DSUB-9 Mail connector,
●
External power supply 10 - 30 VDC stable min. 3W,
●
1000V= or 3000V= galvanic isolation between ETHERNET interface and power supply - depends on version,
●
1000V= or 3000V= galvanic isolation between RS232 interface and power supply - depends on version,
●
Protection against power supply reverse connection,
●
DIN 43880 standard - mounting in typical electro-installation unit,
●
Rail mounting according to DIN35 / TS35 standard,
●
Dimensions (W x D x H) 53mm x 62mm x 90mm.
2.2. DESCRIPTION
ADA-13110 converter is use for data transmission between devices equip with RS232 interface via LAN/WAN network. Data
transmission takes place without the interference of data format. Operating in ETHERNET network can be in Virtual Serial Port, TCP
serial bridge, UDP serial bridge, TCP sockets, UDP sockets. Converter can use protocols: TCP, UDP, DHCP, SNMP, SSL/TLS,
Telnet, Rlogin, LPD, HTTP/HTTPS, SMTP, ICMP, IGMP, ARP. Can be configured and managed via Internet browser – converter has
implemented WWW server. ADA-13110 has standard DB-9M (male) RS232 connector, screw terminal block for connecting the power
supply and RJ45 modular connector for ETHERNET network connection.
The converter transmits data via RS232 interface with maximum baud rate up to 230,4 kbps and uses signals Rx, Tx, RTS, CTS, DTR,
DSR, DCD of RS232 interface.
To the RS232 port of ADA-13110 can be connected to telephone exchanges, barcode scanners, modems, weight, magnetic card
readers. It is adapted for powering from the regular voltage external source which value should contain from 10V to 30V and was
provided from the power pack about 3W power. Converter has implemented protection against opposite polarization of power supply
and over-voltage protection ESD 15kV on RS232 interface lines.
We provide with converter the drivers which installed in the operating systems, will create an additional COM port. This port is the next
free number eg COM3, can be used like a standard COM port. However, it is not the real port existing in a computer, but only a virtual,
created by the system, therefore some programs running under DOS and links to this COM port may not function properly.
Fig 1. ADA-13110 view
2.3. ETHERNET NETWORK COMMUNICATION
2.3.1. TCP/UDP SOCKET MODE COMMUNICATION
Communication in the mode TCP/UDP sockets allows an application SCADA, MMI e.t.c., to transfer data to the serial port of the
converter via Ethernet network by the use of client and server TCP/UDP services.
2.3.2. COMMUNICATIONS IN THE VIRTUAL SERIAL PORT MODE (RealPort)
Communication in the virtual serial port mode allows an application SCADA, MMI e.t.c., to transfer data to the serial port of the
converter via Ethernet network, by the use virtual COM port , created in an operating system.
2.3.3. COMMUNICATIONS IN THE SERIAL BRIDGE MODE
Communication in the serial bridge mode allows transferring data via Ethernet network between serial port of the converter's ports in
one-to-one topology or one-to-many by the use of client and server TCP/UDP services.
2.3.4. OTHER COMMUNICATION TYPES
ADA-13010 converter can be configured in other communication types, like:
– terminal mode,
4
ADA-13110
(RS-232)
ADA-13110
RS-232 to ETHERNET
CONVERTER
PWR
TX
RX
RS-232
DCD DSR DTR CTS RTS
62mm
53mm
6
m
m
1
0m
m
90
m
m
Network activity
transmitting / receiving
Connection activity
8
1
-
+
ACT
LINK
(ETH)
RST
V
+
V
-
10 – 30
VDC