Cel-Fi GO M: Smart Signal Booster
4
Before You Begin
Cel-Fi GO has a
Donor Antenna Port
and a
Server Antenna Port
.
They are marked on the device with icons (see illustration). It is
critical that the
Donor
and
Server
antennas are connected to the
correct port.
Cel-Fi GO M Installation
Place the Donor Antenna on the vehicle. Make sure you consider the
entire system and required cable lengths.
Donor Antenna
Install Donor Antenna
I
TIPS AND TECHNIQUES
• Install antenna at least 12 inches from any other antennas for best
performance
• Antenna should be free of obstructions
• Antenna should be away from windows (including sunroof or other
openings)
• Install 8 inches away from any people
• For best performance make sure there is 50cm of metal around the
base of the antenna.
SERVER
DONOR
Install Server Antenna in the cab where coverage is needed.
Install Server Antenna
2
TIPS AND TECHNIQUES
• For best results, install Donor and Server Antennas such that there is
substantial material between the antennas. This will create isolation and
allow the system to perform at higher gain without oscillation or feedback.
• Keep
Donor
and
Server Antennas
separated/isolated from each other
for best performance.
• The power supply may not be NEMA 4 rated.
Donor Antenna
Server Antenna