6
Setup System with Cel-Fi WAVE
The system is configured to automat-
ically select the best cellular service to
boost. This step can be skipped for any
user that wants to keep the automatic
settings. However, a user may manual-
ly configure the system’s boost prefer-
ences using the
Cel-Fi WAVE
app. To
do this, use the
Cel-Fi WAVE
app on a
smartphone with Bluetooth enabled to
connect to the
Cel-Fi GO X
system, and
manage the boost settings.
TIPS AND TECHNIQUES
• Install antenna at least 12 inches from any other antennas
for best performance
• Antenna should be free of obstructions
• Antenna should be away from windows (including sunroof
or other openings)
• Install 8 inches away from any people
Install Donor Antenna
I
Install Server Antenna
2
4
Connect Donor & Server Antennas
to the Cel-Fi GO X Unit
5
Plug in Cel-Fi GO X
3
Mount Cel-Fi GO X Near Power Outlet
Specifications:
Frequency Support
Multiple variations of the product are available with
different frequency support.
Model:
G32-2/4/5/12/13X
Band Name
Downlink
Uplink
2
1900 PCS 1930
1990
1850
1910
4
AWS-1 2110 2155
1710 1755
5
850
869 894
824 849
12
700 a
729
746
699
716
13
700 c
746
756
777
787
Model:
G32-1/3/5/7/8/20X
Band Name
Downlink
Uplink
1 2100 2110
2170 1920
1980
3
1800+
1805 1880
1710 1785
5 850 869
894 824
849
7 2600 2620
2690 2500
2570
8 900 925
960 880
915
20
800 DD
791
821
832
862
Dimensions
272.5 mm
96.5 mm
43.5 mm
850 g
Length
Width
Height
Weight
Gain
Up to 100dB system gain
Environmental
Operating Temp: 0 - 65C
Relative Humidity: 95%
Power
10dBm/5MHz (16dBm per band)
Antenna Connectors
SMA-Female
Certifications
3GPP TS 25.143 Rel.10
(All variants) 3GPP TS 36.143 Rel.10
RoHS 2
BQB (Bluetooth)
(G32-2/4/5/12/13 FCC
variants only) ISED
(G32-1/3/5/7/8/20 IEC 62368-1:2004
variants only) EN 301 489-1 v2.1.1
EN 301 489-17 v3.1.1
EN 301 489-23 v1.5.1
EN 301 908-1 v11.1.1
EN 301 908-11 v11.1.1
EN 301 908-15 v11.1.1
EN 300 328 v2.1.1
EN 62311 (2008)
Regulation (EC) 1275/2008 (Standby and Off mode)
Regulation (EC) 278/2009 (External Power Supply)
Cel-Fi GO X Installation
Cel-Fi GO X Smart Signal Booster
www.cel-fi.com
DO NOT
plug in at this time.
Find a power outlet.
Mount
Cel-Fi GO X
near the power outlet.
Your
Cel-Fi GO X
will automatically select the strongest
cellular signal to boost.
Find the location
with the best signal.
Install
Donor Antenna
where the mobile device
receives this signal.
DONOR
ANTENNA
DONOR
ANTENNA
DONOR
ANTENNA
DONOR
ANTENNA
DONOR ANTENNA NOT INCLUDED
SAFETY:
DO NOT INSTALL
any equipment close
to power lines or drill into walls or other structural
elements without first ensuring the location is safe and
that there are no hidden items that could cause injury.
Install
Server Antenna
where coverage is needed.
SERVER
ANTENNA
ANTENNA NOT INCLUDED
DONOR
ANTENNA
SERVER
ANTENNA
SERVER
ANTENNA
SERVER
ANTENNA
CEL-FI GO
CEL-FI GO
DONOR
ANTENNA
SERVER
ANTENNA
CEL-FI GO
LEFT SIDE:
Server Antenna Connector
RIGHT SIDE:
Donor Antenna Connector
TIPS AND TECHNIQUES
• For best results, install Donor and Server Antennas such
that there is substantial material between the antennas.
This will create isolation and allow the system to perform
at higher gain without oscillation or feedback.
• Keep
Donor
and
Service Antennas
separated/isolated
from each other for best performance
• Do not use cable splitters for
Donor Antennas
.
•
Follow the installation instructions for your chosen
antennas.
