www.cel-fi.com
Cel-Fi GO X
is optimized for stationary
applications such as buildings, factories,
warehouses, and similar. It features 100dB
of system gain and provides the largest
cellular coverage footprint in its category.
Basic Functionality
The
Cel-Fi GO X
connects to an external Donor Antenna to draw in
a cellular signal from the macro network. The
Cel-Fi GO X
Smart
Signal Booster finds the appropriate cellular signal, per the product’s
configuration, improves the signal, and amplifies it. Improved service
is provided to the user via the Server Antenna.
Note: A Mobile version (“GO M”) of the product is available. Go to
cel‑fi.com for details.
Cel-Fi WAVE Mobile App
The
Cel-Fi WAVE
app provides a User Interface to Cel-Fi systems.
The app’s dashboard shows the system “Boost” value. A numeric
representation mapped to the amount of Signal Gain the system is
providing. Higher is better, with nine (9) being the highest value.
Cel-Fi WAVE and Cel-Fi GO X
Your
Cel-Fi GO X
will automatically select the strongest cellular
signal to boost. However, you may manually configure the system
preferences using
Cel-Fi WAVE
. Connect to
Cel-Fi GO X
with a
bluetooth enabled mobile device, and manage the boost settings.
NEMA 4 Rating
The
Cel-Fi GO X
is NEMA 4 rated, and can be used both indoors and
outdoors.
The NEMA 4 rating provides the following advantages:
• A degree of protection against ingress of solid foreign objects
(falling dirt and windblown dust)
• A degree of protection from the ingress of water (rain, sleet,
snow, splashing water, and hose directed water)
• Equipment will be undamaged by the external formation of ice
on the enclosure
Cel-Fi GO X
Quick Start Guide
Smart Signal Booster
™
qsg_GO-X-Eng_17-0309
LED
MEANING
Solid GREEN
The unit is working properly and boosting properly.
Blinking GREEN
Unit is scanning for networks to boost.
Blinking RED
The unit is in an error condition. Use the
Cel-Fi WAVE
app to
check the error code meaning and remedy.
Solid RED
The unit has a hardware error and is not booting up normally.
Cel-Fi GO X
features an LED on the top face to indicate the
unit’s state:
ISSUE
MEANING
ACTION
Continual Blinking
GREEN
Unit is operational,
but not attaching to a
network to boost.
• Make sure both antennas are connected
properly and are appropriate for the
desired frequencies to boost.
• Make sure the selected operator to
relay is available at your location. This
can be checked with the
Cel-Fi WAVE
application. If the service is not available,
it cannot be boosted.
Solid RED LED
Unit is not
operational.
• Unplug and reinsert power.
• If restart has no effect, contact vendor for
remedy.
Troubleshooting
User Interface
IN THE BOX
* Other variations of the product package may include
additional internal and external antennas or components.
Main Unit
Power Supply
The following antennas are authorized to be used with
Cel-Fi GO X
Smart Signal Booster:
Antenna Kitting
MODEL
DESCRIPTION
FREQUENCY
A32-V32-100
Wideband Panel Antenna
698-960 // 1710-2700 MHz
CERTIFICATION
BAND SUPPORT
FCC, CE
1/3/5/7/8/20/2/4/5/12/13/28
DONOR
SERVER
3
3
MODEL
DESCRIPTION
FREQUENCY
A32-V24-100
Wideband
Directional Antenna
698-960 // 1710-2700 MHz
CERTIFICATION
BAND SUPPORT
FCC, CE
1/3/5/7/8/20/2/4/5/12/13/28
DONOR
SERVER
3
3
MODEL
DESCRIPTION
FREQUENCY
A21-V33-100
Whip Antenna
698-960 // 1710-2700 MHz
CERTIFICATION
BAND SUPPORT
FCC, CE
1/3/5/7/8/20/2/4/5/12/13/28
DONOR
SERVER
3
3
MODEL
DESCRIPTION
FREQUENCY
A11-V43-100
Indoor Omni Antenna
698-960 // 1710-2700 MHz
CERTIFICATION
BAND SUPPORT
FCC, CE
1/3/5/7/8/20/2/4/5/12/13/28
DONOR
SERVER
3
Additional Cel-Fi Antenna options are available at
www.cel-fi.com/antennas
Cel-Fi GO M Smart Signal Booster
