CEL-FI G32-2/4/5/12/13X, Quick Start Manual

Page: 6 / 6

6
qsg_GO-X
-Eng_17-1219
MODEL DESCRIPTION FREQUENCY
A32-V32-100
Wideband Panel Antenna 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, CE 1/3/5/7/8/20/2/4/5/12/13/28
DONOR SERVER
3 3
MODEL DESCRIPTION FREQUENCY
A21-V33-100
Whip Antenna 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, CE 1/3/5/7/8/20/2/4/5/12/13/28
DONOR SERVER
3
MODEL DESCRIPTION FREQUENCY
A11-V43-100
Indoor Omni Antenna 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, CE 1/3/5/7/8/20/2/4/5/12/13/28
DONOR SERVER
3
Additional Cel-Fi Antenna options are available at www.cel-fi.com/antennas
MODEL DESCRIPTION FREQUENCY
A32-V24-100
Wideband
Directional Antenna
698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, CE 1/3/5/7/8/20/2/4/5/12/13/28
DONOR SERVER
3 3
The following antennas are authorized to be used with Cel-Fi GO X
Smart Signal Booster:
Antenna Kitting
ISSUE MEANING ACTION
Continual
Blinking
GREEN
Unit is
operational,
but not
attaching to
a network to
boost.
• Make sure both antennas are connected
properly and are appropriate for the desired
frequencies to boost.
• Make sure the selected operator to relay is
available at your location. This can be checked
with the Cel-Fi WAVE application. If the service is
not available, it cannot be boosted.
Solid RED LED Unit is not
operational.
• Unplug and reinsert power.
• If restart has no effect, contact vendor for remedy.
Troubleshooting