Step 4
Place the Coverage Unit:
Place the
Coverage Unit
as far away,
inside the space, as possible from
the
Network Unit
or where you need
coverage the most, making sure that you
have enough distance between the two
units. After several minutes, the numeric
display will stop cycling.
If your device is set-up properly, the green icons will appear on the display as
seen above. It is possible to place the
Coverage Unit
too close or too far from the
Network Unit
. If this happens, a red icon will illuminate indicating that you need to
move the
Coverage Unit
either closer to, or farther away from the
Network Unit
(see below)
.
Step 5
Optimize The Coverage
Unit Placement:
The number on the front of the
Coverage Unit
display indicates the
quality of the placement. For the best
service experience, move the
Coverage
Unit
around your home until an
8 or
9
displays. Based on the
Coverage
Unit
number, you may need to move
farther/closer to the
Network Unit
.
If you can find a place in your home that gets at least one bar of 4G LTE signal,
the revolutionary
Cel-Fi DUO+
Smart Signal Booster system brings you smoother
video and surfing, and improved coverage throughout your home.
Cel-Fi DUO+
Smart Signal Booster is a true plug-and-play system that doesn’t require the
complicated installation of antennas or cables.
Step 1
Find the location with the best coverage:
The first step in setting-up your
Cel-Fi DUO+
Smart Signal
Booster is to find the location with the best mobile network
signal. Use your phone to identify the area with the best
signal. Typically, the best service will be near a window in
the highest floor of your space.
Make sure a 4G LTE icon
is displayed on your handset.
Step 2
Plug-in the Network Unit:
Plug the
Network Unit
into an easily
accessible outlet near the area with the
strongest 4G LTE signal. (Note: the power
supplies in your kit are identical.) Make sure
that at least one bar is displayed on the
signal strength indicator on the front of the
Network Unit
. If you do not see at least one
bar, try a different location.
Step 3
Optimize the Network Unit Placement:
The bars on the front of the device indicate the strength of
the mobile network signal in the area. Moving the
Network
Unit
to a different location may increase the signal, and
can improve the quality of your service.
NETWORK UNIT
DISPLAY
BETTER
2-3 bars
BEST
4-5 bars
OK
1 bar
Signal Strength
For the best service, move the
Coverage Unit until an 8 or 9 displays.
COVERAGE UNIT
DISPLAY
WIRELESS CONNEC
TION
NETWORK UNIT
DISPLAY
5
BEFORE
You Begin
OK
Two green icons
indicate that the
Coverage Unit
is
functioning normally.
TOO CLOSE
A zero on the numeric display
indicates that the
Coverage Unit
needs to be moved farther away
from the
Network Unit
.
TOO FAR
Four red icons & a scrolling display
indicate that the
Coverage Unit
needs to be moved closer to the
Network Unit
.
SCROLLING DISPLAY
COVERAGE UNIT
DISPLAY
For additional information about
Cel-Fi DUO+ Smart Signal Booster
Installation go to:
www.cel-fi.com