Issue 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
5
3.0
PROGRAMMING
NOTE:
It is recommended that you ground yourself to prevent ESD damage to the
Printed Circuit Board(s).
3.01
Utilizing the security tool (sold separately) loosen and remove the four (4)
security screws, which secure the stainless steel panel to the weatherproof
housing. Carefully
remove the stainless steel panel and attached telephone
assembly from the weatherproof housing.
Programming should be performed
on a suitable flat working surface to avoid damage to the phone.
NOTE
: Be sure to avoid contacting the printed circuit boards with metal
objects, as this may cause damage to the telephone.
3.02
Connect the telephone
line cord to a working telephone line.
3.03
Locate the
two mini-jumpers
on the large main Printed Circuit Board and place
them in the
“ON”
position, as depicted on the last page of this manual.
3.04
Press the CALL button
and wait for dial tone to begin programming.
3.05
Utilizing the programming keypad,
enter # 9 7 # 1 8 # to clear all
user
programmable memory locations.
NOTE:
Once the # key has been entered, an operator reorder signal, fast
busy tone or other central office signals may be heard. Please
disregard these sounds and continue programming, as they will have no
affect on the programming.
