Issue 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
6
PROGRAMMING CONTINUED…
3.06
If the telephone must dial a
PBX or other access number
to begin a call,
enter
# 1 8 followed by the desired
number.
If this is not a desired feature, please
proceed to section 3.06.
This PBX/Access number may range from 1-11 digits.
When the CALL button is pressed the telephone will automatically dial the
PBX/Access number first, followed by an approximate one (1) second pause,
and then dial the auto-dial number (programmed in the next section-3.06). A
“1” must be entered under Digit 8 in section 3.08 in order to activate this
feature.
EXAMPLE:
Enter
# 1 8
9. This will cause the phone to automatically dial the
number “9”, when the CALL button is pressed. This will be
followed by an approximate one (1) second pause and then the
auto-dial number will be released.
#18 __ __ __ __ __ __ __ __ __ __ __
3.07
Enter #19 followed by the desired auto-dial number
. When the phone is in
operation and the
RED Emergency Button
is pressed, this auto-dial
number will automatically dial out. This number may be up to eleven (11)
digits in length. To Program a
Second Number auto-dial on the RED
Emergency Button, Enter # 0 1 followed by the desired number.
#19 ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
#01 ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
(location #01 Second Number Dial for the
RED Button
)
Example:
Enter
# 1 9
5 5 5 1 2 1 2. This will program the phone to automatically
dial the number 555-1212, whenever the
RED Button
is pressed. Enter
# 0 1
5 8
7 5 4 3 0. This will program the phone to automatically dial number 587-5430 if
number 555-1212 does not answer.