ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
7
PROGRAMMING CONTINUED
3.8
When you are finished programming, press the “CALL & HANGUP”
button to hang up the phone. Return the two green mini-jumpers to the
“OFF” or outermost position, as depicted on the last page of this manual.
Secure the telephone assembly in the housing. The phone is now ready for
use.
4.0 OPERATION
To make a call, press the "EMER/CALL" button located on the front of the
phone. Wait to hear dial tone. The LED (if provided) will illuminate red at this
time. After the call is complete, press the "EMER/CALL" button on the front of
the panel again to hang up the phone. If the user does not press the button on the
front of the panel when he or she is finished using the phone, then the phone will
hang up after detecting a wink (open switch interval) or the timer times out.
5.0 RECOMMENDED TOOLS AND TEST EQUIPMENT
DTMF Test Set
Volt/Ohm Meter
CEECO Security Tool, 301-064