Issue 4.0
CEECO
Communication Equipment and Engineering Company
PROPRIETARY
7
PROGRAMMING CONTINUED…
EXAMPLE:
DIAL #00 0152000015
Phone will be set as follows:
DIGIT 1 .. CALL RESTRICTIONS IN EFFECT
DIGIT 2 .. INCOMING CALLS ALLOWED
DIGIT 3 .. 5 MINUTE TIME OUT FOR EMERGENCY CALLS
DIGIT 4 .. 2 MINUTE TIME OUT FOR BLACK CALL BUTTON
DIGIT 5 .. ALWAYS 0
DIGIT 6 .. ALWAYS 0
DIGIT 7 .. ALWAYS 0
DIGIT 8 .. DO NOT DIAL PBX NUMBER STORED IN LOCATION
#18
DIGIT 9 .. DIAL THE PBX ACCESS NUMBER FIRST FROM
LOCATION #02 (
SHORT PAUSE THEN DIAL EMERGENCY
NUMBER).
DIGIT 10 . 250ms WINK
LOCATION #01:
(
EMERGENCY NUMBER
)
#01 ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
This location holds the Emergency number to be dialed. The number can be in
the range of 1 to 11 digits. Whenever a caller pushes the "EMER" (RED) button
the number in location #01 will be dialed. If caller wants to hang up then he or
she
must
push the "CALL " button. The automatic time out
disconnect
features will begin to work after the number has been dialed. The call will also
disconnect when the called end hangs up, provided the PBX gives the proper
wink back on the line.
LOCATION #02:
(
PBX - EMERGENCY NUMBER
)
#02 ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
This location holds the PBX number to be dialed for “Emergency” Calls. The
number can be from 1 to 11 digits. Any number stored in location #02 will
automatically dial first, followed by a pause, then the phone will automatically the
number stored in location #01.