Issue 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
5
3.0
PROGRAMMING
NOTE:
It is recommended that you ground yourself to prevent ESD
damage to the PCB(s).
3.1
Connect the telephone
to a working telephone line or a DTMF test set.
3.2
Locate the pair of plastic
mini-jumpers
along the edge of the PC board.
Move them to the
“on”
or inner most position as depicted in the diagram
on the last page of this manual.
3.3 Press
the “CALL & HANGUP”
button
and wait for dial tone before
entering programming digits.
3.4
Begin by entering
#97#18#
, which
will clear all
user programmable
memory.
NOTE:
Once the # key has been entered, you may hear a fast busy tone,
an operator recording, or other Central Office signals. Please disregard
these sounds and continue programming, as they will have no effect on the
programming.
3.5
Each programming location is accessed by dialing the # sign and the
corresponding two digit code. The previous contents of the location are
automatically erased when the location code is accessed.
3.6
Location “00” is the telephone options location. Please review the options
on the next page. By entering a selected number of 0-9 into each of the
ten digits, the phone is customized for the particular installation.
Enter
#00,
followed by
a series of
ten digits
, as selected from the next page.