ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
8
PROGRAMMING CONTINUED…
3.6
The
SBA keypad
allows
single button dialing
for up to 12 numbers (one
for each button. Please refer to the diagram on page 7). The memory
storage locations are #01 thru #12. Each location will store a number of
up to 11 digits in length. Programming is accomplished by way of the
normally configured, programming keypad and not the SBA keypad. To
accomplish the programming simply
enter the # key, followed by the
appropriate two-digit location code (#01-#12), followed by the desired
speed dial number
.
For example: Entering #015551212 will program the phone to dial 555-
1212 when the 1 button/key is pressed. You must enter the # key, the “0”
key, and the “1” key to program the #01 location. The same is true for all
twelve locations. The keypad layout and corresponding two-digit location
codes are depicted on the next page.
•
Be sure to record your SBA speed dial numbers in the table below for
future reference.
SBA
Speed
Dial
Table:
#01 __ __ __ __ __ __ __ __ __ __ __
#02 __ __ __ __ __ __ __ __ __ __ __
#03 __ __ __ __ __ __ __ __ __ __ __
#04 __ __ __ __ __ __ __ __ __ __ __
#05 __ __ __ __ __ __ __ __ __ __ __
#06 __ __ __ __ __ __ __ __ __ __ __
#07 __ __ __ __ __ __ __ __ __ __ __
#08 __ __ __ __ __ __ __ __ __ __ __
#09 __ __ __ __ __ __ __ __ __ __ __
#10 __ __ __ __ __ __ __ __ __ __ __
#11 __ __ __ __ __ __ __ __ __ __ __
#12 __ __ __ __ __ __ __ __ __ __ __
