ISSUE 4.0
6.0 TESTING
6.1
Once installation has been completed, allow the phones to rest on-hook a
few minutes, with the power supply on.
6.2
Lift the handsets of the units that are intended to talk to one another.
Determine that normal conversation is allowed. If so, return the handsets
to the cradles. The phone units are ready for use.
6.3
If normal conversation does not take place, please review the installation
steps. Make a visual check to ensure that all wires and connectors are as
they should be. Remember that the phone units, which are connected to
the same modular jack, will allow talk paths to one another. A phone
connected to one jack/interface cannot talk to a phone connected to
another jack/interface. The modular jacks/interfaces that are provided
must be used, as they are modified to work in conjunction with the power
supply.
6.4
Once it has been determined that the installation and connections are
correct, and if trouble is still experienced, please refer to section 9.2 of this
manual.
7.0 SPECIFICATIONS
INPUT POWER:
C.O. Line powered or Talk battery (power supply)
LOOP CURRENT:
23 ma min. to 80 ma max.
IMPEDANCE:
600 ohms
HEARING
AID
COMPATIBLE:
Meets
EIA
standards
ENVIRONMENTAL:
Temperature 0° C to 50° C
Humidity
20%-90%
non-condensating
TELEPHONE
COVER:
Brushed
16 ga. Stainless Steel
DIMENSIONS:
4.5" Wide x 4.5" High x 4.5" Deep
(Handset
On-hook)
MOUNTING:
Standard double gang electrical box
Weatherproof
Wall
Mount
Type
WEIGHT:
Approximately
3
lb.
FCC
REGISTRATION:
BW-88T7-13716-TE-T
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
6