5
If needed, gently press the card down to make sure it is seated correctly in the connector.
6
Close the metal door of the connector, gently press down and slide the door to the locked position. This secures the
card in the connector.
7
Orient and replace the rubber pad so that it rests flat in the recessed area of the compartment.
8
Orient the rear cover by aligning the three tabs on the cover with the slots in the case and press it into place.
9
Secure the rear port cover by using a screwdriver to tighten the two screws. The screws should be snug. Do not
over-tighten the screws as this can damage the device.
INITIAL POWER UP
1
Press the power button for 3 seconds and wait for the device to boot.
2
Swipe the screen from bottom to top to unlock the device.
3
If a new SIM card is detected, the SIM management app will automatically launch. Follow the onscreen prompts.
4
The device also provides instructions about opening and securing port covers.
5
To turn off the display, quickly press and release the power button. To fully power down the device, press and hold
the power button for 3 seconds and tap the “power off” option on the screen.
ADDING YOUR GOOGLE ACCOUNT
1
Open the system Settings.
2
Find and tap on Accounts in the Settings list.
3
Tap Add account, and follow the instructions.
INDICATORS
CONNECT TO Wi-Fi (WIRELESS LAN)
1
Open Settings.
2
Tap Wi-Fi.
3
Tap the On/Off control to turn on the Wi-Fi radio.
4
Tap on your desired wireless network.
5
Enter the key or password (if needed).
6
Tap CONNECT.
CONNECT A BLUETOOTH DEVICE
1
Open Settings.
2
Tap the On/Off control to turn on the Bluetooth radio.
Bluetooth
Full Battery
Network Cell
Network WiFi