Important!
When creating a match in WinMSS and importing to the
timer, you must assign all shooters to squads number 1
and up. Do not place shooters in squad 0 or unassigned,
as the timer cannot handle that.
Run Match
1. Select Menu -> Mode -> Match -> Run Match
2. Select Stage
3. Select Squad
4. Select Shooter
At this point, the Timer is ready to Run the shooter of
your choice. Note that you can, using the up and down
arrow buttons, choose a different shooter to run first
through the stage.
As you run the shooters, they will be removed one by
one from the list of shooters in the squad who need to
shoot that stage. Once the last shooter has been scored,
a notice will appear informing you that “all shooters in
squad X have been scored on stage Y”.
5. Press Start to activate the Timer
6. Once shots have been recorded, you have two op
tions: A. Score or, B. Re-Shoot. Selection is made
with the up and down arrow buttons
7. Selecting Re-Shoot will get you back to point 4
8. Select Score and press “E”
9. Using the A, C, D, M, P* buttons, enter the shooter’s
hits on all targets
10. Once the last hit has been scored a summary screen
will appear showing the stage time and hits
* Pressing the P (Penalty) button will pop up a penalty
selection: 1 or -1 which means either add a penalty
or subtract a penalty (if one or more have been added
before). You can add several penalties at once, such as
may be needed in case of a foot fault.
9
