ENGLISH
27
HIDROBOOST 3200 INDUCTION PRO
6. TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
No soap suctions
•
The high-pressure
extension hose or hose is
too long
•
The pump injector is
clogged
•
The soap bottle is clogged
•
Remove the high-pressure
extension hose or use a
shorter one (less than 7 m)
•
Contact the Technical Support
Service of Cecotec
•
Clean the accessory with warm
water
•
Replace the accessory
Smoke comes out
from the device
•
Overheating, overload or
damaged motor
•
Turn the device immediately
of and contact the Technical
Support Service of Cecotec
Not enough
pressure
•
Water inlet filter is
clogged
•
Air from the hose
connections is entering
the pump
•
The nozzle or relief valves
are worn or not the
correct size
•
Clean the water inlet filter
•
Check that connections and
locking ring are properly
tightened
•
Contact the Technical Support
Service of Cecotec
