ENGLISH
15
CONGA DUOSTICK EASY
•
Brush the filter or clean it with lukewarm water without detergent or similar products. Let it dry
completely (for at least 24 hours) before putting it back in place.
CLEANING OF THE FELT’S:
•
The felts must be cleaned at least twice a year or whenever you find accumulated dirt
that has started solidifying.
•
Always use the vacuum cleaner with the felts in place. Otherwise, it can lose suction
power or the engine might get damaged.
•
Make sure that you unplug the appliance before cleaning the felts.
•
Gently brush the felts so as not to damage them by using cleaning paper or a cloth.
Remove all the accumulated dirt.
5. TROUBLESHOOTING
TROUBLE
CAUSE
SOLUTION
Lack of suction.
Excess of dust on the filter.
Clean dust filter.
Full dirt container.
Empty the dirt container.
Blocked tube.
Remove any element that
obstruct the passage of air
.
The engine does not
work.
The plug is not connected to
the mains supply.
Connect the plug to a socket.
Overheating of the
body.
Slight temperature rising on
the accessible surfaces of the
device is normal during use.
In case of higher temperature
rise, check that the device
suction nozzles and opening
of the device are not blocked.
Check all openings of the device
and remove obstacles that block
and prevent air circulation. If the
problem persists, Let it cool down
for 30 min.
6. TECHNICAL SPECIFICATIONS
Model: Conga DuoStick Easy
Product reference: 05096
Rated power: 600 W
Maximum Power: 800 W
Voltage and frequency: 220-240 V, 50/60 Hz
Suction power ≥17 kPa and noise level ≤80 dB
Cable length: 4,9 m
Dirt container capacity: more than 1 l
Summary of Contents for CONGA
Page 2: ......