cecotec CECOFRY ADVANCE INOX, Instruction Manual

Page: 47 / 104

CECOFRY ADVANCE INOX
CECOFRY ADVANCE INOXDARK
47
ENGLISH
5. TROUBLESHOOTING
Problem Possible cause Solution
The device does not work. The product is not plugged in. Plug the device in.
You have not set the timer. Set the timer using the
timer knob to switch on the
appliance.
The ingredients inside the
device are not fried. There are too many
ingredients inside the basket. Put smaller pieces inside the
basket so they are fried more
evenly.
The temperature used is too
low. Use the temperature knob
to set a higher temperature
setting.
The preparation time is not
enough. Use the timer knob to set a
longer preparation time.
The ingredients are fried
unevenly in the air fryer. Some types of food need to
be sautéed during the cooking
process. Ingredients that lie on top
of or across each other (e.g.
fries) need to be shaken
during the preparation time.
Fried foodstuff is not crispy
when they come out the
device. You used a type of foodstuff
that is meant to be prepared
in a traditional deep fryer. Oil the foodstuff a little bit to
get a crispier result.
The container cannot be
placed inside the device
properly. There are too many
ingredients inside the basket. Do not fill the basket beyond
the Max mark.
The basket is not placed in
the container correctly. Push the basket down into
the container until you hear a
“click” sound.
White smoke comes out of
the appliance. You are preparing greasy
ingredients. When greasy foodstuff are
fried, a large amount of oil
will leak into the container.
Frying oil produces white
smoke, and the container may
heat up more than usual. This
does not affect the appliance
or the result.
The container is still greasy
from previous uses. White smoke is caused by
heating up oil in the container.
Make sure you clean the
container properly after each
use.