BREEZECARE 2600 LIGHT SMART
23
ENGLISH
2
.PARTS AND COMPONENTS
Fig. 1.
1.
Cover
2.
Display and control panel
Fig. 2.
1.
Display
2.
On/off
3.
Mist fan
4.
LED light
5.
Timer
3
. BEFORE USE
Take the product out of the box.
Remove all packaging material and save the original box.
Make sure all parts and components are included and in good conditions. If any visible signs
of damage are observed, contact the Technical Support Service immediately.
4
. OPERATION
Note: The ideal relative humidity level for human comfort is between 45 % and 65 %. Excess
humidity shows up in the form of condensation on cold surfaces or cold walls in the room. To
measure the room’s humidity correctly, use a hygrometer.
Relative humidity in different environments suitable for people:
Bedroom, living room: 45-65 % RH
Patient’s room: 40-55 % RH
Room with computer, experiment equipment: 45-60 % RH
Room with piano: 40-60 % RH
Museum, exhibition hall, and library: 40-50 % RH
Place the device on a flat surface.
Remove the cover and fill in the water tank. Do not exceed the maximum level mark on the
tank. Replace the cover.
Press the On/off button on the control panel to turn the device on. The display will show the
room temperature in ºC and the current relative air humidity in %.
Press the mist button to select the desired mist power level.
Press the timer button to select the desired runtime: 2, 4, 6 or 8 hours.
Press the LED light button to turn on the product’s light.
If the device is not going to be used for some time, empty the tank. To do so, take the cover
off, tilt the product (tank and base together) and pour all the water out.
Fig. 4.
Warning: Do not exceed the maximum water level mark when adding water: 3.2L.
Remote control
All functions can be operated from the remote control.
Fig. 3.
1.
LED light button
2.
Humidification setting
3.
Time decrease
4.
Time increase
5.
On/off button
5
. CLEANING AND MAINTENANCE
Use a soft, damp cloth to clean the surface of the device.
Do not use detergent, scouring pads, chemically treated cloths, gasoline, benzene, alcohol,
thinner, or other solvents, as these can scratch and damage the tank and cause water
leakage.
Do not immerse the product in water or any other liquid.
If scale is built up due to the use of hard water, it is recommended to:
Use cold boiled water or distilled water.
Change the water in water tank more often to keep it fresh.
Make sure to pour out water from the water tank and dry the water basin before you store it
unused for a long time.
Clean the whole humidifier and make sure that all parts of the humidifier are dried completely
if it is supposed to be leaved unused for a long time.
ENGLISH
24
BREEZECARE 2600 LIGHT SMART