BOLERO SQUAD I 3000
69
ENGLISH
6. TROUBLESHOOTING
Problem
Possible causes
Possible solution
The induction
hob does not
turn on.
There is no power supply. Make sure the hob is connected to the
mains and it is on.
Check if there has been a power failure.
After these checks, if the problem persists,
please contact the official Cecotec Technical
Service.
The touch
controls do not
work.
The buttons are locked.
Unlock the buttons. Check the ‘Buttons lock’
section for instructions.
It is difficult to
use the touch
buttons.
There may be a slight
film of water on the
buttons or you may be
using your fingertip to
press the buttons.
Make sure the touch control area is dry and
use your finger base to press the buttons.
The glass is
damaged.
Cookware with
rough edges. Use of
inappropriate and
abrasive scouring pads
or cleaning products.
Use cookware with flat and smooth
bases. Check the ‘Selection of the suitable
cookware’ section. Check the ‘Cleaning and
maintenance’ section.
Some cookware
makes crackling
or popping
noises.
This may be due to the
construction of your
cookware (layers of
different metals that
vibrate differently).
This is normal for cookware and does not
indicate a fault.
The induction
hob produces a
slight buzzing
sound when
used at high
power.
This is due to the
induction cooking
technology.
It is usual, but the noise should decrease
or completely disappear by lowering the
power setting.
02502_Placa Bolero Squad I 3000 _IM_YV_01220125.indd 69
02502_Placa Bolero Squad I 3000 _IM_YV_01220125.indd 69
10/2/22 17:36
10/2/22 17:36