64
ENGLISH
Remove dust, dirt and other substances or objects. Fig. 37.
Close the lower cover cap. Fig. 38.
Warning:
Make sure that the valve cap and emergency drain hose are reinstalled properly, cap plates
should be inserted aligned to the hole plates.
*Some machines do not have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate the lower cover cap directly for water to run into the basin.
When the appliance is in use and depending on the programme selected there can be hot
water in the pump. Never remove the pump cover during a wash cycle, always wait until the
appliance has finished the cycle and is empty.
When replacing the cover, ensure it is securely re-tightened.
6. TROUBLESHOOTING
Problem
Cause
Solution
The washing machine does
not start up
The door is not closed
properly
Restart after the door is
closed.
Check if there are clothes
stuck.
The door does not open
The safety lock system is
activated
Unplug it and restart the
product.
Water leakage
Bad connection between
pipes and water supply
hose or drainpipe.
Check and fasten water pipes
and hose.
Clean up outlet hose.
Detergent residues in the box
Detergent is dampened or
agglomerated
Clean and wipe the detergent
box
Indicator or display does not
light
The power PC board is
disconnected, or harness
has connection problem
Check if the power is shut
down and the power plug is
connected correctly.
Abnormal noise
Check if the fixing bolts have
been removed.
Make sure the appliance is
installed on a solid, level
floor.
02314_02315_02320_Bolero DressCode 6000_7000_8000_Manual_YV_01200903.indd 64
02314_02315_02320_Bolero DressCode 6000_7000_8000_Manual_YV_01200903.indd 64
5/10/20 13:10
5/10/20 13:10
