cecotec BOLERO AGUAZERO 1006 COMPACT/SILVER, Instruction Manual

Page: 80 / 252

80
ENGLISH
There are rust stains on the
cutlery The affected items are not
dishwasher safe. Avoid washing articles which
are not dishwasher safe.
You did not run a programme
after adding salt to the
dishwasher. There were salt
remains in the washing cycle. Always run a wash
programme with no load after
adding salt. Do not select
the Turbo* function (if it is
included in your model) after
adding salt to the dishwasher.
The water softener cover is
loose. Check the water softener
cover is properly closed.
Knocking noise in the
dishwasher The spray arm is hitting an
item in the basket. Pause the programme and
place the items blocking the
spray arm again.
Rattling noise in the
dishwasher The tableware is loose in the
dishwasher. Pause the programme and
place the items again.
Knocking noise on water
hoses This may be caused by
the installation or the pipe
section. It does not affect the
dishwasher operation. If you
have any doubts, contact a
qualified plumber.
Dishes are not clean You have not loaded them
correctly. Read the ‘Loading the
dishwasher’ section.
The programme is not
powerful enough. Select a more intensive
programme.
Not enough detergent has
been dispensed. Use more detergent or
change the detergent.
There are items blocking the
spray arm movement. Place the items again so the
spray arm can move freely.
The filtering set is not clean
or not correctly placed in the
bottom of the dishwasher.
This may block the spray
arms holes. Clean and/or place the filter
correctly.
Clean the spray arm holes.