ENGLISH
17
READY WARM 6550 TURBO CONVECTION DESIGN
2. SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
• Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
• This appliance is intended for household use only. Do not
use for industrial or commercial purposes.
• Do not cover the air inlet or outlet openings while the
appliance is operating. Keep a minimum distance of 65 cm
from the appliance to any object or wall on each side, front
and back.
• Avoid the use of an extension cord as this may overheat and
cause a risk of �e.
• Always turn off and unplug the appliance when not in use
and before moving it to a new location. Pull from the plug,
not the cord, to disconnect it from the outlet.
• Do not reach for an appliance that has fallen into water,
unplug immediately.
• Do not immerse the cord, plug, or any non-removable part
of the appliance in water or any other liquid, nor expose the
electrical connections to water. Make sure your hands are
dry before handling the plug or switching on the appliance.
• Place the appliance on a �����������
e.
• Check the power cord regularly for visible damage. If the
cord is damaged, it must be replaced by the o���
Technical
Support Service of Cecotec in order to avoid any type of danger.
• Do not operate the device if it does not work properly.
• Do not place the appliance close to heat sources, ����
substances, wet surfaces where it can fall or be pushed into
water or allow it to come into contact with water or other
liquids. Do not operate outdoors.
• The product’s surface might reach high temperatures
during operation. Hold the heater only by the handle in
order to move it.
• Do not insert or allow objects to enter any air inlet or outlet,
as this may cause an electric shock, �e or damage to the
appliance.
05316_Ready Warm 6550 Turbo Convection Design_Manual.indd 11
12/8/19 14:39
