cecotec 04243, Instruction Manual, Page: 25 / 48

BAMBA SKINCARE PURE 25
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. On/off button
2. Dust tank cover
3. Rolling head
4. LED light
5. USB input
6. Vacuuming system
7. Dust tank (washable)
2. BEFORE USE
Take the product out of the box.
Remove all packaging materials. Keep the original box.
Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
The product is waterproof so it can be washed under running water.
3. OPERATION
This product is designed to remove the dead skin on heels and the foot’s sole. Do not use it on
other parts of your body.
Add water on the part where the device is going to be used to soften it.
Note: If the part is wounded or there is blood on it, do not use the device.
Long press the power button for 2 seconds so the device will enter the slow-grinding mode
and the indicator light will turn green. Press the power button again to enter the high-grinding
mode and the indicator light will turn red.
Place the device on a dry area and rotate the rolling head in all directions for 2-3 seconds. Do
not press too hard against the skin or the device will automatically stop.
If the skin turns red or painful while using the device on it, stop immediately
Do not stay on the same part for more than 2-3 seconds.
Press the power button for 2 seconds to turn it off.
Wipe the skin with a towel after use to remove the cuticles that remain.
Improper use of the device can lead to skin damage.
Replacing the rolling head