14
15
ENGLISH
ENGLISH
BAMBA IONICARE 6000 ROCKSTAR VISION
BAMBA IONICARE 6000 ROCKSTAR VISION
• Do not wind the cord around the device.
• Do not allow the appliance to come into contact with your
face, neck or scalp.
• Do not leave the appliance on any surface while it is
operating.
• Do not use the appliance to dry wigs, fake hair or animal
hair. Use it only to dry and style real human hair.
• The appliance is not intended to be used by children under
the age of 8. It can be used by children over the age of 8, as
long as they are given continuous supervision.
• This appliance can be used by children aged 8 and above,
and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge, as long as
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
• Supervise young children to make sure that they do not play
with the appliance. Close supervision is necessary when the
appliance is being used by or near children.
Warning:
If the product suffers overheating, it will automatically
turn off. In this case, unplug it from the power supply and allow
it to cool down for a few minutes. Before turning it back on,
make sure there are no fluffs, hair or other objects blocking the
grid or air inlet.
3. BEFORE USE
1.
Take the product out of the box.
2. Remove all packaging materials. Keep the original box.
3. Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
4. Keep a distance of at least 10 cm between hair and air inlet, to avoid hair from entangling
into the hair dryer.
4. OPERATION
This hair dryer releases ions, which protect hair, skin and seal cuticles for a total care of your
hair during use.
1.
Before plugging in the device make sure the power button (7) is switched to the off
position. “0” is off “1” is on.
2.
Plug the power plug into the socket and turn the power button position to “1”.
3.
The temperature button has 3 modes, clicking the temperature button once will select
the low temperature mode, two times will select the warm mode and three times will
select the hot mode.
4. Temperature LED indicator:
•
Red LED: Hot mode
•
Yellow LED: Warm mode
•
Blue LED: Cold mode
5.
The power selector (6) controls the air output of the device.
6.
After using, switch the hairdryer to the off position and unplug the power cord.
Note:
Keep a distance of at least 10 cm between hair and air outlet to avoid tangling or risk of
burning.
Installation of nozzles
This product is equipped with two nozzles. A smoothing nozzle and a diffuser.
•
To install the nozzle or diffuser, align the bottom of the nozzle with the air outlet and
lightly insert until it clicks into position.
•
Disassembly of nozzles
•
To remove the nozzle or diffuser, gently unclick and extract until it unclicks from posi-
tion.
