GRANDHEAT 2590 BUILT-IN STEEL BLACK
65
ENGLISH
1. PARTS AND COMPONENTS
Img. 1.
1. Control panel
2. Glass tray shaft
3. Glass tray ring assembly
4. Glass tray
5. View window
6. Door
7. Safety lock system
8. Grill rack (Only suitable for Grill function,
must be placed on the glass tray)
2. BEFORE USE
Take the product out of the box. If the microwave has a protective film, tear it off before
starting operation. Check carefully if there is any damage, and if there is, immediately notify
the Technical Support Service.
The product must be placed on a flat, stable and dry place and kept away from corrosive
materials, heat and humidity, such as gas burners or water.
The product must be placed in such way that the plug is accessible and must ensure an
effective grounding in case of leakage in order to avoid electric shocks.
The microwave door must be closed in order to operate.
In case there is any manufacturing rests in the microwave cavity or on the heating elements,
leave the microwave open to ensure good ventilation. In such case, it is recommended to heat
a glass of water at high power for several times.
Warning: Do not remove the mica cover that is attached to the microwave cavity to protect the
magnetron.
3. PRODUCT INSTALLATION
Glass tray installation
Img. 2.
a. Hub
b. Glass tray
c. Glass tray shaft
d. Glass tray ring assembly
When installing the glass tray:
Img.16
1. Micro/Grill/Combi
2- Weight/Time defrost
3. Timer/Clock
4. Knob (increase/decrease)
5. Stop/Clear
6. Start/+30Sec/Confirmar
7. Door opening button
Never place the glass tray upside down.
Both glass tray and glass tray ring assembly must always be used during cooking.
All food and food containers must always be placed on the glass tray for cooking.
If the glass tray or the ring assembly cracks or breaks, contact the Technical Support Service
of Cecotec.
Note: This appliance is intended for built-in use only. It is not intended for counter-top use
or for use inside a cupboard. The appliance must be installed in a 60-cm wide wall-mounted
cupboard.
Electrical connections
If the plug is no longer accessible after installation, an all-pole isolating switch must be on one
of the sides with a contact gap of 3 mm.
The fitted cabinet must not have a back wall behind the appliance.
The minimum height installation must be 85 cm.
Do not cover the ventilation slots.
Microwave
Img. 3.
Screw A
Img. 4.
Screw B
Img. 5.
Mounting plate
Img. 6.
Plastic cover
Img. 7.
Built-in furniture
Img. 8.
Preparing the cabinet
Img. 9.
Read the instructions on the bottom of the cabinet. Put the template on the bottom plane of
the cabinet.
Img. 10.
Make the marks on the bottom part of the cabinet according to the “a” marks on the template.
Img. 11.
Remove the bottom cabinet template and fix the mounting plate with screw A.
Microwave installation
Summary of Contents for 01395
Page 2: ......
Page 4: ......
Page 130: ...Fig Img Abb Afb Rys Obr 10 Fig Img Abb Afb Rys Obr 11 Fig Img Abb Afb Rys Obr 12...
