background image

 

2

 
INSTALLATION 

 

Water Inlet Connection: 

This equipment is to be installed to comply with the applicable Federal, State, or local plumbing codes having jurisdiction.  In 
addition: 
1.  A quick disconnect water connection or enough extra coiled tubing (at least 2x the depth of the unit) so that the machine 
can be moved for cleaning underneath. 
 
2. An approved back flow prevention device, such as a double check valve to be installed between the machine and the water 
supply. 
 
The JAVA2-LP  is equipped with a 

1/4" 

Flare Water Inlet Fitting

located on the lower left side in the back of the base. 

 
HIGHLY RECOMMENDED:  
A WATER SHUT-OFF VALVE and A WATER FILTER, preferably a combination Charcoal/Phosphate Filter, to remove odors and 
inhibit lime and

 

scale build up in the machine.   Note:  In areas with extremely hard water, a water softener must be installed 

in order to prevent a malfunctioning of the equipment and in order not to void the warranty. 

 

 

STARTUP PROCEDURE 

 

Caution:   Make sure that the Heater Switch, located behind right hopper with door opened,  is in the OFF position. 

1.

 

Connect the 

1/4" dia

 copper waterline to the 

1/4" flare

 water inlet fitting of the valve. 

 
2.

 

Plug the power cord into a proper receptacle. 

 
3.

 

Activate the 

Power Switch

 (Toggle Up). The door display panel and the green dispense buttons will light up and the

 

tank 

will start filling.     Allow approximately

 2

 minutes for the tank to fill. 

 

4.

 

Activate the 

Heater Switch

.   Allow approximately 15 - 20 minutes for the water to reach a preset temperature of 

200°F.   The heat up time will depend on the water inlet temperature, the input voltage and the wattage of the elements 
in the machine. 

 
5.    Place cup under nozzle and press dispense switch. The machine will dispense water at the rate of 1-1.3 oz. per second.  
       Repeat it several times for each dispense switch to check for consistent output.  
 
6.    While the tank is heating up, remove the hoppers, load them with products and reposition them back in the machine.   
       When the heater light  goes OFF, the tank has reached its brew temperature and the machine is ready to dispense Coffee.

 

 
 
 
 
 
 
 
 
 
 
 

VOLUME AND DRINK SIZE ADJUSTMENTS: 

Summary of Contents for JAVA2-LP













Reviews: