cec AMP3300R Owner'S Manual Download Page 3

Precautions for use

  Check that the operating voltage of your unit is identical with the voltage 

of your local power supply (see operating voltage on the rear panel of the 
unit). Connecting a 100-120V unit to 230V causes severe damage and may 
even cause fire, electrical shock or explosion! 

  Should any liquid or solid object fall into the cabinet, unplug the unit and have it 

checked by qualified personnel before operating it any further.

 Sometimes in summer you have faults in your local power supply due to 

overloading. Unplug the unit from the wall outlet when there is a thunderstorm.

  Unplug the unit from the wall outlet if it is not to be used for an extended period 

of time. To disconnect the power cord, pull it out by grasping the plug. Never 
pull the cord itself. Refer servicing to qualified personnel only.

  Unplug the unit from the wall outlet before connecting other units or opening the 

unit.

Location

  Do not install the unit in a location near heat sources such as radiators or air 

ducts, or in a place subject to direct sunlight, excessive dust, mechanical 
vibration or shock. Leave space around this unit for heat dissipation, especially 
near the heat sink on backside. You should leave 10 cm of space on each side 
and 30 cm above AMP3300R.

Condensation

  When this unit is brought into a warm room from previously cold surroundings or 

when the room temperature rises sharply, condensation may form inside, and 
the unit may not be able to attain its full performance. In cases like this, allow 
the unit to stand for about an hour or raise the room temperature gradually.

Fuses

 The fuses are inside of the unit and should be changed by qualified personnel only.

Caution

  Changes or modifications to this equipment not expressly approved by CEC Co. 

Ltd. for compliance will void the user’s warranty.

AC-Line

  If there is any break or cut in the AC-line cord, unplug it from the wall outlet and 

replace it by a new one!

Cautions Regarding Handling 

Summary of Contents for AMP3300R









Reviews: