C-9877
Connection of the power supply to the motors control module
Figure 7 – 4 :
To supply the motors control module it is
necessary to use a special cable. At a first extremity there
are two connectors with two male lug pins which are
connected to the terminal block of the motors control
module.
Figure 7 – 5
：
Connection of the power supply to the
motors control module.
Attention, polarity.
The positive pole (12V) corresponds to the
corner terminal of the motors control
module (see picture).
The terminal which is more centered on this
terminal block is not used.
Figure 7 – 6
：
The other extremity of the cable has two female connectors
that will connect to the pins of the Shield module.
Summary of Contents for C-9877
