GB
21
CLEANING
It is important to keep the appliance clean and in good working order to ensure optimum quality of
the products and long life of the appliance.
Cleaning of the appliance must be carried out by
persons with knowledge and practical
experience of the appliance
.
At the end of
each working day
, clean the outer surfaces dirty with coffee (bellows, bellows support,
discharge spout etc.).
Always disconnect the plug of the appliance from the power socket before cleaning it.
Clean the motor housing and the tray
with a cloth dampened with water or alcohol.
Wipe with a dry cloth.
Never put the appliance under running water and never immerse in water.
-
Use a paintbrush to clean the most hidden areas inside. To facilitate cleaning, remove the
discharge spout cover (8 Fig. 1).
MAINTENANCE
Maintenance must be carried out exclusively by qualified technical personnel.
Care for the mechanical and electrical parts of the appliance is indispensable in order to guarantee
their safety and efficiency. If any parts need replaced, authentic spare parts must always be used.
TROUBLESHOOTING
(See Table on the next page)
In case of any malfunction, defect of the appliance or if you suspect any breakage after a fall, unplug
the appliance immediately.
If you are unable to solve the problem referring to the table below, contact an Authorized Service
Centre.
Only qualified experts should repair the appliance.
We are not liable for any damage caused by repairs not made correctly and/or by unauthorized
personnel. In these cases the warranty does not apply.
