CE CLEVELAND CE-2500-HVE, Operation Manual

Page: 31 / 33

CE-2500-HVE Band Sealer
Page 30
XV. Preventive Maintenance Checklist
Each use :
o
Visually inspect bands for excessive wear
o
Check for heating on both element blocks
o
Check switches to ensure proper operation (everything turns on etc.)
General routine maintenance:
o
Replace Teflon belts if needed
o
Inspect rubber belts
o
Check both heating elements for proper heating
o
Clean and blow out machine thoroughly including behind the blocks
o
Check all of the rollers that drive the belts and that emboss or print for excessive play side to side
generally you will see a belt walking off or riding up or down as a symptom.
o
Check gears on the inside of machine after dusting clean off old grease and apply new
o
(for non/food applications use any gear grease,
for food grade applications you will need an h1 food grade grease)
o
Check all electrical connections for loose junctions and all ice cube relays for corrosions or
discolored connectors
o
Check motor brushes for wear
o
Check motor gear head for movement and put oil in via the plastic nut installed into the top
o
(for food grade some type of food grade oil or pack the same h1 grease into the head,
nonfood any machine oil or grease will do fine)
o
Check the conveyor belt, table and adjusters for wear and proper use
o
Check and grease the chain in the conveyor (same grease as the inside gears)
o
Check conveyor rollers for wear and bearing health