Thank you for purchasing this Cdx product. Please follow the fixing and care instructions to
ensure that your Kensington wall mounted range is fitted safely and that it retains its high quality
finish.
Please retain this leaflet for future reference.
This instruction leaflet applies to the following Kensington products:
QB552743 TOWEL RAIL
QB551943 SOAP DISH
QB556643 SOAP DISPENSER
QB551843 DOUBLE TUMBLER & HOLDER
QB551143 TOILET ROLL HOLDER
QB551743 ROBE HOOK
QB551543 TOWEL RING
QB551443 GLASS SHELF
QB552443 TOILET BRUSH
QB553843 SOAP BASKET
Fixing Pack Contents
Fixing Screws x 2 (4 for Glass Shelf & Towel Rail)
Wall Plugs x 2 (4 for Glass Shelf & Towel Rail)
Hex Head Key x 1
Spare Grub Screw(s) x 1 (2)
Contents will vary depending on product. The quantities in brackets are for double bracket fixing.
Only use the fixings supplied.
Tools Required
Drill; 6mm masonry drill bit (6mm ceramic drill bit optional); Cross head screwdriver; Pencil; Spirit
level; Tape measure; Hex head key (supplied).
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Home Safety Advice
Always take care when using an electric drill, particularly in the bathroom. Always check for
hidden cables and pipe work before drilling and take extreme care if there is any water in the
working area.
It is advisable to use a residual current circuit breaker (RCCB).
Always wear suitable eye protection when drilling.
If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used. Always
ensure that the drill hole passes through the central tiled area rather than through the grouted
area. To prevent unnecessary damage to the tile, mask the area around the hole with tape
before drilling.
Do not strike the product with hard or sharp objects.
