Fabricant de Contrôle d’Accès depuis 1985 Manufacturing Access Control since 1985
The installer’s choice
Receiver type:
Supereheterodyne.
Demodulation: AM/ASK.
Operating frequency:
433.92 Mhz.
Sensitivity ( for good signal ):
-115 dBm.
Input load:
50 Ohm.
Power supply :
230 Vac - 50 Hz.
Current consumption
15 mA @230 Vac
Relay contacts
2 x NO/NC.
Max current on relay output:
16 A.
Memory capacity:
500 transmitters
Security protocol
Keeloq® Hopping code
N° of code combinations
2
64
Operating temperature:
from -20 to +70 °C.
Overall dimensions ( Fig. 2):
155 x 118 x 56 mm
Weight:
115 gr.
Relay operating mode
Pulse, step, timed
Delay
from 1 sec. to 24h: 59 min.
Enclosure protection
IP55
The receiver Erone type SEL2641R433-XPL2V ( Fig. 1) is a AM/ASK single conversion
superheterodyne receiver with integrated “Keeloq® Hopping code” decryption.
A special algorithm allows to keep synchronyzed transmitter and receiver.
Power supply : 230 Vac.
The receiver relays output, can drive many type of loads, up to 16A / 230 Vac.
The transmitter memorization can be carried out either with 2 push-buttons of the receiver
or remotely, using only the keys of the transmitter. The setup of the remaining parameters
can be done only with the 2 push buttons of the receiver. All the setting steps are displayed
by a backlit LCD display.
The internal data can be saved/restored to/from an external memory.
2 RELAYS RECEIVER SEL2641R433-XPL2V
2
Technical Specifications
3
Mounting
www.erone.com - www.cdvigroup.com
Fig.1
1
Introduction
Drill the placing surface
with ø6 mm tool and insert the 2 plugs
Then fix the support with
the screws provided
F1001000092
Fig. 3
Fig. 2
Fig. 1
ERONE
XPL2V
118
155
56
4 x PG11 + 1 PG7 cable
glands ( provided )
ERONE
XPL2V