38
39
EN
EN
SASIC
2-door Control Unit
Description of warning lights and commands
1
General alarm warning
light
Problem detected on the SAS central unit, see alarm scenarios to identify
the reason for the problem.
2
Warning light and Open
doors 1 & 2 Push Button
Requests the opening of the two doors simultaneously for 10 seconds.
If one of the doors is already open or locked, the request to open is cancelled.
3
Master warning light
“M”
If this warning light is lit up and steady, the Control panel is master.
4
Button “M/S”
Master / Slave
For requests to take over as master or to pass control back and return to slave
status.
5
Slave warning light “S”
If this warning light is lit up and steady, the Control panel is slave.
6
Warning light and
Manual
door 1 PB
Transfers the door 1 to manual mode*
7
Warning light and Auto
door 1 PB
Transfers the door 1 to automatic mode*
8
Alarm warning
light door 1
Door 1 has not closed after timed opening period has expired.
9
Call warning light on
door 1
Door 1 is in manual or locked mode and somebody is requesting entrance
at this door using the traffic light indicator.
10
Warning light and PB
lock door 1
Door 1 can no longer be opened using the push button, the traffic light indicator
or the open commands on the control panels. But it can be opened by an external
reader or by a remote transmitter.
11
Warning light and Open
door 1 PB
The control panels command the timed door opening on door 1.
12
Warning light and
manual
door 2 PB
Transfers door 2 to manual mode*
13
Warning light and Auto
door 2 PB
Transfers door 2 to automatic mode*
14
Alarm warning light
door 2
Door 2 has not closed after timed opening period has expired.
15
Call warning light on
door 2
Door 2 is in manual or locked mode and somebody is requesting entrance
at this door using the traffic light indicator.
16
Warning light and Open
door 2 PB
The control panels command the timed door opening on door 2.
17
Warning light and Lock
door 2 Push Button
Door 2 can no longer be opened using the push button, the traffic light indicator
or the open commands on the control panels. But it can be opened by an external
reader or by a remote transmitter.
*See functioning on chapter 7.1.3
