4
cdvigroup.com
EN
RSIP
RS-232 to TCP/IP Converter
INSTALLATION MANUAL
EN
RSIP
RS-232 to TCP/IP Converter
INSTALLATION MANUAL
1. Click on
"Serial Settings"
tab
2. Set Baud rate to 19200 (CT-900-A default
setting)
3. Enable
"Pack Control"
to 12 msec
4. Set Flush Mode ›
Flush Input Buffer ›
With Active Connect put
"Yes"
Flush Output Buffer ›
With Active Connect put
"Yes"
5. Keep the default setting for the rest
6. Click OK
Click on
"Connection"
tab
•
Keep the default setting
(The port number must be defined in ALL
controllers connected to that RSIP module.
To set the port number in the CTV-900-A
controller, go to the controller properties
window, tab «configuration» (by default is
1001, see diagram below).
1.
2.
3.
4.
CTV-900-A
Controller properties window
