3
If you omit to reprogram the Master code in the new length format then the default master code value
will be modified a follow:
Code length changed to 4-digit code then the master code 2345
Code length changed to 6-digit code then the master code 012345
Press # to exit from programming mode 2 beeps confirm that you went back to the reading mode.
4 beeps indicate a data computing error.
C.
Master code
Enter the master code twice (for the first use the master code default value is 12345). The orange LED and
two beeps sound to confirm entry in the programming mode.
Press
¿
3 then enter the 3, 4, 5, 6, 7 or 8-digit new master code. The LED lights off during 1 second and an
audible beep will sound to indicate that the new master code has been accepted.
NEVER SET A PROGRAMMED USER CODE AS A MASTER CODE!
Press # to exit from programming mode 2 beeps confirm that you went back to the reading mode.
D.
Pin codes
Enter the master code twice (for the first use the master code default value is 12345). The orange LED and
two beeps sound to confirm entry in the programming mode.
Enter the user number (00 to 99). The LED lights off during 1 second and an audible beep sound.
If the LED is green, enter the 3, 4, 5, 6, 7 or 8-digit Pin code. The LED lights off during 1 second and an au-
dible beep is emitted.
The LED lights in orange to indicates that the new Pin code has been programmed
If a pin code has already been programmed or is the same as the master code, then 4 beeps are emitted.
Then the LED lights on in red (user code programmed), select another user code or delete the Pin code pro-
grammed for this user code.
Press # to exit from programming mode. 2 beeps confirm that you went back to the reading mode.
E.
Delete or replace a Pin code
Enter the master code twice (for the first use the master code default value is 12345). The orange LED and
two beeps sound to confirm entry in the programming mode.
Enter the user number to delete (00 to 99). The LED lights off during 1 second and an audible beep
will sound.
The red LED indicates that the user number is already programmed.
Press
¿
twice. The LED lights on in green to indicate that the user number can reprogrammed
again.
Enter another user number and follow the same steps to delete a Pin code.
Press # to exit from programming mode 2 beeps confirm that you went back to the reading mode.
