Digiway SR Easy Start Guide
Mounting Dimension for Articulated Arm
–
Outward Opening Doors
Initial Phase:
MAKE SURE ALL EXISTNG CLOSING MECHANISMS HAVE BEEN REMOVED AND REPLACED WITH
DUMMY UNITS IF NECESSARY.
Once the Digiway SR has been installed make sure the door can be opened and closed with completely free
movement.
Only connect Mains and either a RTE switch on T15 & T16 or use the radio remote (easier).
Link terminals 5,6 & 7 together, connect mains and then the battery.
Switch on power.
Press and hold the centre button (OK Button) of the programming buttons located on the Digiway until the
display appears.
Navigate using the Up/Down buttons to “Tx Management”
Press “OK” to enter menu.
“ADD” will be displayed press “OK”
Press the left-hand top button on the remote.
Press “Escape” (Left button of the programming buttons)
Navigate to “Exit” and press OK
The Transmitter can now be used to program the Digiway remotely.
To gain access to the menu using the
transmitter press “ESC” & “DOWN” together, the display will change to “Main
Menu”, you can then scroll through using the up and down buttons and OK to enter or set.