CDVI CDV47, User Manual

Page: 12 / 16

How to set the slave monitor address
How to set the monitor panel on



   
The system offers two methods of date and time.
The code number of 8008 is used to set the date format as month/day/year
The code number of 8009 is used to set the date format as day/month/year
The code number of 8012 is used to set the time format as 12 hour system
The code number of 8013 is used to set the time format as 24 hour system
How to set date and time format
-12-
How to set the name list
On the main menu select “intercom” – then select “Name List Call”.
Highlight the number you wish to name/change and select . A keyboard will appear,
enter/change the name then press ok to save.
Maximum 4 monitors can be connected in one apartment,one master monitor together
with 3 slave monitors, so you should set the address correctly.(
N
ote: one monitor
must
be set as master monitor)
The code of 8000 is used to set the master monitor.
The code of 8001 is used to set the first slave monitor .
The code of 8002 is used to set the second slave monitor .
The code of 8003 is used to set the third slave monitor .
In default mode,when receive a calling, the master and slave monitors will ring at the
same time, the master monitor
will
display the image while the slave monitors
will
not.
T
he settings can be changed
to allow
the master monitor and all the slave monitors to
show the
panel
image
at the same time when receiving a call, input the code 8006 on
each slave monitor.