EN
EN
500-LADJ
Electromagnetic Lock Bracket
3
3. Mount the magnet to the flat sliding plate in the same way you would for a stand
ard “L” bracket (see diagram below) and secure through the 2 or 4 pre-drilled holes,
depending on the magnet you are using.
4. Ensure the hole where the wire comes out of the magnet corresponds with the one
on the flat plate and that the magnet faces outwards on the edge of the slide plate
(see drawing below).
This can all be pre prepared before attending site or in bulk on site before taking to
each door location in order to save time.
STEP II
Fit the armature to the door and secure the main body to the transom in the same way
you would with an “L” bracket taking care to ensure that the sliding plate can travel
freely under the transom.
Depending on the type of door frame
the mag lock can be fitted at the
front or the back of the plate which is
achieved by simply turning the plate
around