EN
EN
300-LADJ
Electromagnetic Lock Bracket
2
Package Contents & Components
6 x M6x22
for sliding plate
2 x M6x22
for guide
channels to
body
1 x Allen key
4 x self-tapping
transom fixings
STEP I
1. Remove the slide plate from the main body - On top of the main body bracket there
are 3 fixings at either end. Loosen all three fixings, on both sides (do not over
loosen otherwise they will fall out of the fixing nuts and will have to be relocated)
just enough for the plate to slide out easily.
2. Remove the fixing plate that comes attached to the top of the magnet – note that
not all magnets have this.
Installation