4
5. Setting
the coin quantity to carry out a test.
● Note: Please cut off the power supply before operation.
The number of similar coins required is set by dial switch S1 located inside the unit.
This means that the switch on the top is 1 and the switch on the bottom is 0. Setting
range from 0-15 units.
For example, in Photo 3, both the first and third switches are at the bottom (they
both mean 0); the second and fourth switches are at the top (they both mean 1).
So, according to Table 2, in this example you would need 5 coins to perform the
test. One (1) coin is the default setting1).
Photo 3
Table 2
A
B
C
D
Coin quantity
0
0
0
0
0
0
0
0
1
1 (default is 1 coin)
0
0
1
0
2
0
0
1
1
3
0
1
0
0
4
0
1
0
1
5
0
1
1
0
6
0
1
1
1
7
1
0
0
0
8
1
0
0
1
9
1
0
1
0
10
1
0
1
1
11
1
1
0
0
12
1
1
0
1
13
1
1
1
0
14
1
1
1
1
15
C.D.Products S.A
