6.
Output power in W
7.
Output power in VA
If alarm is mute,
icon
will be on.
When battery level is low,
icon will flash
every second.
Alarm will beep every
second. This alarm can not
be mute.
Overload in
battery mode
When overload occurs, alarm
will beep every 0.5 second.
icon will flash every
second.
NOTE:
The backlight will be always on when any fault or warning occurs.
Fault Code Table:
Fault condition
LCD
Solutions
Output short
circuited
Disconnect short-circuited loads
and restart the UPS again.
Overload fault
Remove excessive loads and
restart the UPS again.
Output fault in
battery mode.
Call for service immediately.
Overcharge
1.
Turn off the unit and wait for
cooling.
2.
Or remove excessive loads
and wait for cooling.
Low battery in
battery mode.
Shut down the UPS and
re-charge the battery when the
utility is restored.
If fault alarm occurs, please call for service immediately.
