C. Programmable Timer
1. Press the SET button to select the programmable
timer.
SET
appears on the display.
Note:
The timer retains any time showing on the display
when in other channels.
2. Count Down
a. When timer is stopped, press both HOUR and MIN
buttons simultaneously to reset to
0:0000
.
b. Press the HOUR and/or MIN buttons to enter
the desired time. Press and hold for fast advance.
c. Press the START/STOP button to start counting
down.
Note:
The channel name flashes on the display during
count down when in other channels.
d. Press the START/STOP button to interrupt the
count. Press START/STOP again to resume the
count.
e. The alarm sounds and the
alarm icon
() flashes on
the display when the count reaches
0:0000
.
f. Press any button to stop the alarm and flashing.
Note:
The alarm and flashing stop automatically after 60
seconds.
g. When timer is stopped, press both HOUR and MIN
buttons simultaneously to reset to
0:0000
.
3. Count Up
a. When timer is stopped, press both HOUR and MIN
buttons simultaneously to reset to
0:0000
.
b. Press the START/STOP button to begin the
count up.
Note:
The channel name flashes on the display during
count up when in other channels.
c. Press the START/STOP button to interrupt the count.
Press START/STOP again to resume the count.
d. When timer is stopped, press both HOUR and MIN
buttons simultaneously to reset to
0:0000
.
Care of Your Product
• Avoid exposing your timer to extreme temperatures,
water or severe shock.
• Avoid contact with any corrosive materials such as
perfume, alcohol or cleaning agents.
• Wipe clean with a damp cloth.
© 01-2015 Component Design Northwest, Inc.
Made in China
CD9999291en - 1/16 L-DESIGN 614.525.1472
The information in this document has been reviewed and is
believed to be accurate. However, neither the manufacturer nor
its affiliates assume any responsibility for inaccuracies, errors
or omissions that may be contained herein. In no event will
the manufacturer or its affiliates be liable for direct, indirect,
special, incidental or consequential damages arisen by using
this product or resulting from any defect/omission in this
document, even if advised of the possibility of such damages.
The manufacturer and its affiliates reserve the right to
make improvements or changes to this document and the
products and services described at any time, without notice
or obligation.
5-Year Limited Warranty:
Any instrument that
proves to be defective in material or workmanship
within five years of original purchase will be repaired
or replaced without charge upon receipt of the
unit prepaid at: CDN, PO Box 10947, Portland, OR
97296-0947. This warranty does not cover damage
in shipment or failure caused by tampering, obvious
carelessness or abuse.
CE Note:
This device could be sensitive to electrostatic
discharge. If electrostatic discharge or malfunctioning occurs,
please re-install the battery to reset this unit.
For more detailed
information on our
products, please visit
cdn-timeandtemp.com.
