2
D. Weighing Mode
1. Touch and hold the ON/OFF button for
2 seconds to turn on. The display will show all
segments and a “beep” will sound. The display
then returns to zero.
2. Place an item on the scale platform. The weight
of the item appears on the display within
1 second after the item is stable.
Note:
The minimum measurable weight is 1 g/0.05 oz/1 ml.
E. Tare
The tare function resets the scale display to zero
in order to measure only the weight of an item.
It is frequently used to subtract the weight
of containers.
1. When the scale is on, place a container on
the platform.
2. Touch the TARE button to reset the display to zero.
3. Place the item into the container or directly on
the scale platform. The weight of only the last
item added will appear on the display.
4. Continue to repeat steps
2.
and
3.
to measure
the respective weights of additional items.
5. To clear the tare, remove all items from the
platform and touch the TARE button. The display
is reset to zero.
F. Timer
1. Touch the TIMER button to begin the count up.
Note:
The timer counts up to a maximum of 99 minutes and
59 seconds and then turns off automatically.
2. Touch the TIMER button to interrupt the count.
3. Touch the TIMER button again to resume the count.
4. To clear the display, touch the TIMER button
twice to reset the display to
0:00
.
G. Battery Status
0:00 Lo
indicates when power is lower than 3.0V.
Charge the battery.
H. Error Messages
1.
0:00 EEEEE
indicates an overload when the
item being measured exceeds the capacity of
the scale. Immediately remove the overweight
item to avoid causing permanent damage to
your scale.
2.
88:88 UnSt
indicates that the scale is unstable.
Place the scale gently on a hard and flat surface
and make sure it is steady before turning on
without any items on it.
Note:
Clean the scale platform before each use.
CE Note:
This device could be sensitive to electrostatic
discharge. If electrostatic discharge or malfunctioning
occurs, please re-install the battery to reset this unit.