![CDN IN482 Quick Start Manual Download Page 4](http://html1.mh-extra.com/html/cdn/in482/in482_quick-start-manual_2576732004.webp)
© 02-2020 CDN
Made in China
CD9999396en - 2/20 L-DESIGN 614.525.1472
CE Note:
This device could be sensitive to electrostatic
discharge. If electrostatic discharge or malfunctioning
occurs, please re-install the battery to reset this unit.
The information in this document has been reviewed and is believed to
be accurate. However, neither the manufacturer nor its affiliates assume
any responsibility for inaccuracies, errors or omissions that may be
contained herein. In no event will the manufacturer or its affiliates be
liable for direct, indirect, special, incidental or consequential damages
arisen by using this product or resulting from any defect/omission in
this document, even if advised of the possibility of such damages.
The manufacturer and its affiliates reserve the right to make
improvements or changes to this document and the products and
services described at any time, without notice or obligation.
1-Year Limited Warranty:
Any instrument that proves to be
defective in material or workmanship (excluding batteries)
within one year of original purchase will be repaired or
replaced without charge upon receipt of the unit prepaid at:
CDN, PO Box 10947, Portland, OR 97296-0947 USA.
This warranty does not cover damage in shipment or
failure caused by failure to adhere to the accompanying
instructions, inadequate maintenance, normal wear
and tear, tampering, accident, misuse, unauthorized
modification, obvious carelessness or abuse. CDN shall
not be liable for any consequential or incidental damages
whatsoever.
For more detailed information on our
products, please visit CDNkitchen.com
or call 800-338-5594.
CAUTION:
Avoid keeping the thermometer too close to
objects that continuously generate high heat for long
periods (i.e., hot plate). This can cause the thermometer
to overheat.
EMC/RFI
Readings may be affected if the unit is operated within a radio frequency
electromagnetic field strength of approximately 3 volts per meter, but
the performance of the instrument will not be permanently affected.