CDL Maple Sugaring Equipment inc.
11
This will give you access to specific, advanced information for your flowmeter such as:
•
Flowmeter name
•
Station name
•
Last communication with CDL monitoring system
•
Communication delay with CDL monitoring system
•
Current flow rate
•
Total accumulated for the day
•
Total accumulated
•
Signal strength
•
Software versions
•
Volume graph by day
•
Volume graph by period (week, month or year)
MAINTENANCE
•
IMPORTANT!
Rinse well with unsweetened (plain) water at the end of the season.
•
If the flow rate displays zero while running, make sure that the small inner rotor
is not obstructed. Make sure it rotates freely, without friction. Use warm water to
thoroughly rinse and clean it as needed to keep it turning freely.
•
Turn off the power supply if the device is not going to be used for a long period of
time. (Note: The flowmeter will remember the data that was displayed when the
power was turned off.)
•
When you restart the flowmeter each year, use your interface to make sure that
the device is communicating properly with the monitoring system. Make sure the
communication intervals are good.